Checks | Cause | ||||||
|---|---|---|---|---|---|---|---|
Side Cover (53) | Cracks in the cover or the cover is not flat | ||||||
Flanged Nuts (50) | Low torque | ||||||
Bolt and Washer Assemble | Low torque | ||||||
Side Cover Gasket (54) | Split gasket | ||||||
Flanged Nuts (50) | High torque | ||||||
Bolt and Washer Assemble | High torque | ||||||
Inner Gasket (55, 59) | Split gasket | ||||||
Flanged Nuts (50) | High torque | ||||||
Bolt and Washer Assemble | High torque | ||||||
Fluid Fill Tube |
| ||||||
Electric Connector (35) | Case porosity | ||||||
O-Ring Seal (36) | Cut or nicked O-ring | ||||||
Reverse Servo Cover (40) | Cracks or porosity | ||||||
O-Ring Seal (41) | Cut or nicked O-ring | ||||||
Forward Servo Cover (13) | Cracks or porosity | ||||||
O-Ring Seal (14) | Cut or nicked O-ring | ||||||
Case (3) | Porosity | ||||||
Cooler Ball Check Assembly (28) and Cooler Pipe Fitting (29) |
| ||||||
Modulator Assembly (32) | Split or cracked seams | ||||||
O-Ring Seal (33) | Cut or nicked O-ring | ||||||
Case Extension (6) | Cracks or porosity | ||||||
Extension Seal (8) | Cut or nicked seal | ||||||
Right Hand Axle Seal Assembly (4) and Left Hand Axle Seal Assembly (409) |
| ||||||
Manual Shaft Seal (806) | Cut or nicked seal | ||||||
Converter Seal Assembly (525) |
| ||||||
Speed Sensor Assembly (10) | Damaged housing | ||||||
O-Ring Seal (11) | Cut or nicked seal | ||||||
Parking Plunger Guide (809) | Porosity in the case | ||||||
O-Ring Seal (810) | Cut or nicked seal |
