Removal Procedure
- Remove the oil pan. Refer to 
Oil Pan Replacement 
.
 
- Remove the filter. Remove the lip ring
seal pressed into the case only if replacement is necessary.
 
- Inspect the screen for the following foreign material:
 
| •  | Inspect for metal particles. | 
 
| •  | Inspect for clutch facing material. | 
 
| •  | Inspect for rubber particles. | 
 
| •  | Inspect for engine coolant. | 
 
- Determine the source of the contamination if foreign material
is evident.
 
- Correct the source of the contamination.
 
- Use solvent to clean the screen.
 
- Blow-dry the screen.
 
Installation Procedure
- Install the seal. Install a new lip ring
seal into the case if the seal was previously removed.
 
- Install a new filter if required.
 
- Install the oil pan. Refer to 
Oil Pan Replacement 
.