Exhaust Brake Actuator Sleeve Replacement for Chevrolet Chevrolet C-Series Medium Duty Truck B7 1998

1. Remove the circlip and the washer.
2. Slide off the actuator from the actuator sleeve and the pivot pin.

Remove the actuator.

3. Remove the actuator sleeve and the washer.

1. Install the washer over the pivot pin.
2. Install a new actuator sleeve into the actuator.
3. Slide the actuator and the sleeve onto the pivot pin.
4. Install the washer and the circlip.
5. Ensure that the circlip is properly seated.