Engine Oil Pressure Sensor and/or Switch Replacement for Chevrolet Chevrolet C-Series Medium Duty Truck B7 1999

Tools Required

J 41712 Oil Pressure Sensor Socket

1. Disconnect the electrical connector.
2. Remove the oil pressure sensor using J 41712 .




Important: Note the alignment of the oil pressure sensor fitting prior to removal.

3. Remove the oil pressure sensor fitting, if necessary.

Tools Required

J 41712 Oil Pressure Sensor Socket

1. Install the oil pressure sensor fitting, if removed.

Tighten

•	Tighten the oil pressure sensor fitting to 15 N·m  (11 lb ft).

Important: Do not tighten more than one turn.

•	Tighten the fitting until properly align.




2. Install the oil pressure sensor.

Tighten
Using J 41712 tighten the oil pressure sensor to 30  Nm (22 lb ft).

3. Install the electrical connector.