Removal Procedure
- Remove the right rear quarter trim panel. Refer to 
Rear Quarter Trim Panel Replacement 
   in Interior  Trim.
 
- Disconnect the electrical connector from the blower motor resistor.
 
- Remove the retaining screws from the blower motor resistor.
 
- Remove the blower motor
resistor (1) from the vehicle.
 
Installation Procedure
- Install the blower motor
resistor (1) to the vehicle.
 
- Install the retaining screws to the blower motor resistor.
 
- Connect the electrical connector to the blower motor resistor.
 
- Install the right rear quarter trim panel. Refer to 
Rear Quarter Trim Panel Replacement 
   in Interior  Trim.