For 1990-2009 cars only
Removal Procedure
- Pry up the rear edge of the left door switch assembly.
- Slide the switch assembly rearward.
- Disconnect the electrical connector.
- If replacing a bulb, insert a small screwdriver into the slot in the base of the bulb and turn counterclockwise to remove the bulb.
Important: Protect the trim panel with a rag when prying up the switch to prevent marring the trim panel.
Installation Procedure
- If replacing a bulb, insert a bulb into the back of the switch and turn the bulb clockwise to secure.
- Connect the electrical connector to the switch.
- Insert the front edge of the switch into the door trim panel.
- Press the rear edge of the switch into the trim panel to secure.
