Brake Pad Inspection for Chevrolet Epica 2005

Caution: Refer to Vehicle Lifting Caution in the Preface section.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Inspect the brake pads for wear.



4. Measure the thickness.

Specification

•	The minimum thickness of the inner or the outer front brake pad is 2 mm (0.08 inch).

•	The minimum thickness of the inner or the outer rear brake pad is 2 mm (0.08 inch).

5. Install the brake pads in axle sets only.
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
7. Lower the vehicle.