Removal Procedure
- Remove the oil pan (24)
and the gasket (25). Refer to 
Oil Pan Replacement 
 .
 
- Remove the filter (100).
Remove the lip ring seal (101) pressed into the case only if replacement is
 necessary.
 
- Inspect the screen for the following foreign material:
 
| •  | Inspect for metal particles. | 
 
| •  | Inspect for clutch facing material. | 
 
| •  | Inspect for rubber particles. | 
 
| •  | Inspect for engine coolant. | 
 
- Determine the source of the contamination if foreign material
is evident.
 
- Correct the source of the contamination.
 
- Use solvent to clean the screen.
 
- Blow-dry the screen.
 
Installation Procedure
- If removed, install a
new seal (101).
 
- Install the filter (100),
a new filter if required.
 
- Install the gasket (25)
and the oil pan (24). Refer to 
Oil Pan Replacement 
 .