Lower Control Arm Ball Joint Replacement for GMC Truck Canyon Pickup - 2WD 2007

Lower Control Arm Ball Joint Replacement 4WD, 2WD Z71

1. Remove the steering knuckle. Refer to Steering Knuckle Replacement .



2. Remove the ball joint nuts and bolts from the lower control arm. Discard the nuts and bolts.
3. Remove the ball joint from the lower control arm.

1. Install the ball joint to the upper control arm.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the new ball joint nuts and bolts to the lower control arm.

Tighten
Tighten the nuts to 64 N·m (47 lb ft).

3. Install the steering knuckle. Refer to Steering Knuckle Replacement .
4. Verify the wheel alignment. Refer to Wheel Alignment Specifications .

Lower Control Arm Ball Joint Replacement 2WD, Z85, ZQ8

1. Remove the steering knuckle. Refer to Steering Knuckle Replacement .



2. Remove the ball joint nuts and bolts from the lower control arm. Discard the nuts and bolts.
3. Remove the ball joint from the lower control arm.

1. Install the ball joint to the lower control arm.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the new ball joint nuts and bolts to the lower control arm.

Tighten
Tighten the nuts to 60 N·m (44 lb ft).

3. Install the steering knuckle. Refer to Steering Knuckle Replacement .
4. Verify the wheel alignment. Refer to Wheel Alignment Specifications .