Stabilizer Shaft Link Replacement for GMC Truck GMC Sierra Denali 2003

Stabilizer Shaft Link Replacement 35 Series

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the stabilizer shaft link nut (5) from the frame (1).
3. Remove the stabilizer link nut from the stabilizer shaft (4).

Notice: Refer to Fastener Notice in the Preface section.




1. Install the stabilizer shaft link to the frame (1) and to the stabilizer shaft and install the retaining nuts (5).

Tighten

•	Tighten the stabilizer shaft link bolt to the frame (1) to 95 N·m (70 lb ft).

•	Tighten the stabilizer shaft link to the stabilizer shaft to 145 N·m (107 lb ft).

2. Lower the vehicle.