Horn Switch Replacement - On Vehicle for GMC Truck Savana 1998

Tools Required

J 1859-A Steering Wheel Puller

1. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
2. Mark the relationship of the steering wheel (1) to the column.



3. Remove the steering wheel and the nut (2). Refer to Steering Wheel Replacement .
4. Use the J 1859-A in order to remove the steering wheel from the column.

1. With the marked relationship references in line, install the steering wheel (1) onto the column. Refer to Steering Wheel Replacement .

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the steering wheel nut (2).

Tighten
Tighten the steering wheel nut to 41 N·m (30 lb ft).

3. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.