Door Control Module Replacement for GMC Truck Savana 2000

Notice: Refer to Handling Electrostatic Discharge Sensitive Parts Notice in the Preface section.

1. Remove the driver side hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.



2. Remove the door control module case from the front end inner side panel by sliding toward the front of the vehicle.
3. Open the module case by lifting the cover tab.
4. Carefully remove the door control module (1) by sliding it out of the case.

1. Carefully install the door control module (1) by sliding it into the case.
2. Close the case cover and engage the cover tab.



3. Install the door control module case to the front end inner side panel by sliding toward the rear of the vehicle.
4. Install the driver side hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.