Propeller Shaft Center Support Bearing Replacement for GMC Truck Sierra Classic - 2WD 2007

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the propeller shaft. Refer to Two-Piece Propeller Shaft Replacement .



3. Remove the center bearing by doing the following:

3.1.	Stand the propeller shaft (2) on end in the press (1) with the center bearing (3) supported by the press bars (4).

3.2.	Press the propeller shaft (2) down and off the center bearing (3).

1. Install the center bearing (3) onto the propeller shaft (2) by pressing the center bearing onto the shaft using a press (1).
2. Install the propeller shaft. Refer to Two-Piece Propeller Shaft Replacement .
3. Lower the vehicle.