GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Yukon XL Denali 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Liftgate Close Actuator Motor Control Module Replacement

Liftgate Close Actuator Motor Control Module Replacement for GMC Truck Yukon XL Denali 2009

Liftgate Close Actuator Motor Control Module Replacement Except Avalanche and Escalade EXT


Object Number: 1735866 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the bodyside trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side.
  2. Disconnect the power liftgate actuator rod. Refer to Liftgate Actuator Rod Replacement.

1

Liftgate Close Actuator Motor Control Module

Procedure

    • Disconnect the electrical connector.
    • Cut the tie strap, if equipped.

2

Liftgate Close Actuator Motor Control Module Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

3

Liftgate Close Actuator Motor Control Module

Procedure

If a replacement control module is installed, program the module. Refer to Control Module References.