For 1990-2009 cars
Removal Procedure
- Roll the window all the way down.
- Remove the window regulator handle. Refer to Door Window Regulator Handle Replacement .
- Remove the trim panel. Refer to Door Trim Panel Replacement .
- Remove the water deflector at the bottom by peeling the water deflector back.
- Remove the inner mounting panel screws.
- Remove the door lock rods from the inner mounting panel.
- Tape the door lock rods to the door.
- Remove the lower run channel bolt.
- Remove the inner mounting panel and window assembly from the door frame by tilting the assembly and lowering the assembly from the door.
- Remove the glass from the channel by folding back the tab on the channel and sliding the glass out.
Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
| 8.1. | Loosen the upper run channel bolt. |
| 8.2. | Move the run channel away from the glass. |
Installation Procedure
- Install the glass into the channel by folding the tab on the channel up.
- Install the inner mounting panel and glass assembly into the bottom of the door.
- Install the front run channel bolt.
- Install the lock rods to the inner mounting panel.
- Install the water deflector. Refer to Door Water Deflector Replacement .
- Install the inner mounting panel to door screws.
- Install the trim panel. Refer to Door Trim Panel Replacement .
Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
| 2.1. | First fit the glass into the rear channel in the door. |
| 2.2. | Fit the glass into the front run channel while pulling the channel toward the glass. |