Seat Belt Buckle Replacement - Right Front ANZ, AN8, AQ1

1. Remove the seat belt buckle side or the unit bolt from the floor panel.
2. Remove the seat belt bolt sealers. Discard the sealers.
3. Remove the seat belt buckle side or the unit from the vehicle.

1. Install the NEW seat belt bolt sealers.



2. Install the NEW seat belt buckle side or the unit in the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Important: Use NEW bolts in order to install seats.

3. Install the NEW seat belt buckle side or the unit bolt to the floor panel.

Tighten
Tighten the seat belt buckle side or the unit bolt to 55 N·m (41 lb ft).

Seat Belt Buckle Replacement - Right Front AQQ, AQR

1. Remove the seat belt locking cable bolt from the floor panel if equipped. Discard the bolt.
2. Remove the seat belt bracket and the locking cable from the vehicle if equipped.



3. For the low back seat belt bracket mounting, remove the seat belt locking cable bolt from the floor panel if equipped . Discard the bolt.
4. For the low back seat belt bracket mounting, remove the seat belt bracket and the locking cable from the vehicle if equipped.



5. For the high back seat belt mounting, remove the buckle side nut and mounting bolt.
6. For the high back seat belt mounting, remove the buckle side mounting.



7. For the low back seat belt mounting, remove the buckle side mounting bolt.
8. For the low back seat belt mounting, remove the buckle side mounting.



9. Remove the seat belt bolt sealers. Discard the sealers.

1. Install the NEW seat belt bolt sealers.



2. For the low back seat belt mounting, install the buckle side mounting.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. For the low back seat belt mounting, install the buckle side mounting bolt.

Tighten
Tighten the low back seat belt buckle side bolt to 40 N·m (30 lb ft).




4. For the high back seat belt mounting, install the buckle side mounting.
5. For the high back seat belt mounting, install the buckle side mounting bolt.

Tighten
Tighten the high back seat belt buckle side bolt to 90 N·m (66 lb ft).

6. Inspect the bolts after installation.
7. Ensure that a minimum of 2 threads protrude beyond the nut or the anchor plate.