Removal Procedure
- Remove the lock housing cover assembly.
Refer to
Steering Column Upper Housing Replacement
.
- Remove the switch actuator pivot pin (2) from the windshield wiper
and washer switch assembly (1).
- If necessary, remove the wire harness straps.
- If necessary, disconnect the connector of the windshield wiper and washer
switch assembly at the base of the column.
- Pull the windshield wiper and washer switch assembly connector through
the steering column, if needed.
Installation Procedure
- Insert the windshield wiper and washer switch
assembly connector through the steering column housing assembly, if needed.
- Lubricate the switch actuator pivot pin (2) with lithium grease.
- Install the switch actuator pivot pin (2) into the windshield wiper
and washer switch assembly (1).
- If necessary, connect the connector of the windshield wiper and washer
switch assembly at the base of the steering column
- Install the lock housing cover assembly. Refer to
Steering Column Upper Housing Replacement
.