Removal Procedure
- Remove the push-pin from
the center support (1).
- Remove the fasteners (2) from the socket side sunshade.
- Attach the sunshade to the center support (1).
- Pull down on the sunshade in order to remove the sunshade from
the headliner.
- Partially lower the headliner in order to disconnect the wiring
harness connector (if the vehicle is equipped with a lighted vanity mirror).
Refer to
Headlining Trim Panel Replacement
.
Installation Procedure
- Connect the wiring harness
connector.
- Install the sunshade through the openings in the headliner.
- Snap the retainer behind the headliner into place.
- Install the fasteners (2).
- Install the push-pins.