ABS: Refer to ABS Description and Operation in Antilock Brake System

Air Bag: Refer to SIR System Description and Operation in SIR

(Export)

BRAKE

BRAKE: Refer to Brake Warning System Description and Operation in Hydraulic Brakes

Charge: Refer to Charging System Description and Operation in Engine Electrical

Fasten Seat Belt: Refer to Seat Belt System Description and Operation in Seat Belts

High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems

Low Oil Pressure: Refer to Indicator/Warning Message Description and Operation

MIL: Refer to Engine Control Module Description in Engine Controls - 2.2L (L61) or to Powertrain Control Module Description in Engine Controls - 2.0L (LSJ)

Security: Refer to Theft Systems Description and Operation in Theft Deterrent

Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems

Upshift Indicator: Refer to Indicator/Warning Message Description and Operation

CHG. OIL

The instrument panel cluster (IPC) receives a class 2 message from the engine control module (ECM)/powertrain control module (PCM) indicating that the engine oil should be changed.

CHK GAGE

The instrument panel cluster (IPC) receives a class 2 message from the engine control module (ECM)/powertrain control module (PCM) indicating that the engine coolant temperature is over 123°C (253°F). This message is disabled when the engine coolant temperature is below 120°C (248°F).

COOLANT

Coolant Level Low: : Refer to Cooling System Description and Operation in Engine Cooling

CRUISE

Cruise: Refer to Cruise Control Description and Operation in Cruise Control

ERROR

Error: Refer to Data Link Communications Description and Operation in Data Link Communications

LOW FUEL

The instrument panel cluster (IPC) receives a class 2 message from the engine control module (ECM)/powertrain control module (PCM) indicating the fuel level percent. The IPC displays the LOW FUEL message when the fuel level is at or below 10 percent. When the fuel level is above 25 percent, the LOW FUEL message is turned OFF.

LOW OIL PRESSURE

The instrument panel cluster (IPC) illuminates the engine oil pressure indicator when the engine control module (ECM)/powertrain control module (PCM) detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting illumination from the ECM/PCM.

LOW TRAC

Low Traction: Refer to ABS Description and Operation in Antilock Brake System

OIL LIFE

The instrument panel cluster (IPC) displays the OIL LIFE message when the message center is in oil life monitor reset mode. When this message is displayed, the oil life monitor in the engine control module (ECM)/powertrain control module (PCM) can be reset by holding the trip reset button for a few seconds. The ECM/PCM receives a class 2 message from the IPC to reset the oil life monitor.

PWR STR

Power Steering: Refer to Power Steering System Description and Operation in Power Steering System

RESET

The instrument panel cluster (IPC) displays the RESET message after the engine control module (ECM)/powertrain control module (PCM) has received an oil life monitor reset request, via a class 2 message.

SERVICE VEHICLE

The instrument panel cluster (IPC) displays the SERVICE VEHICLE message when it receives a request from any module because of a detected problem.

SHIFT INDICATOR

The instrument panel cluster (IPC) illuminates the shift indicator when the engine control module (ECM)/powertrain control module (PCM) determines that the vehicle should be shifted to the next higher gear. The IPC receives a class 2 message from the ECM/PCM requesting illumination.

TRAC OFF

Traction Off: Refer to ABS Description and Operation in Antilock Brake System

TRANS COLD

Transmission Cold: Refer to Transmission Indicators and Messages in Automatic Transmission

TRANS HOT

Transmission Hot: Refer to Transmission Indicators and Messages in Automatic Transmission

TRUNK

Trunk Ajar: Refer to Luggage Compartment Description and Operation in Body Rear End